How to Measure Clothes for Online Shopping: Which Size Chart Numbers Matter?

|Hoonjong Jwa
How to Measure Clothes for Online Shopping: Which Size Chart Numbers Matter?

MONSEN SUITORY / FIT & SIZE GUIDE

A better size decision starts with the type of number in the chart.

Editorial review: September 30, 2026

To measure clothes for online shopping, first find out whether the listing gives body measurements, finished garment measurements or only a size label. Compare like with like. If the listing gives garment measurements, measure a similar piece you already wear well at the seller’s stated points. If it gives only body ranges, measure your body instead. When a critical point or the measurement method is missing, ask before ordering.

Menswear measurement diagram with body and garment points to check against a listing
Use this illustration to locate common areas. Follow the exact endpoints and units on the item’s own size chart.
The three-question size check What does the chart measure? Do the listed points match my reference garment or body measurements? Is the difference acceptable at the areas I cannot easily alter, such as shoulders, seat and thigh? If you cannot answer the first two questions, a familiar size label is not enough evidence.

Choose the right comparison before using the tape

Body range shown: measure your chest, natural waist or other named body point around your body. Use the range as the seller defines it; do not directly compare it with a shirt laid flat.
Finished garment size shown: fasten a similar item, lay it flat without stretching, and use the same endpoints. Compare a shirt with a shirt and trousers with trousers of a similar intended fit.
S, M, L or 30, 32 only: these are selection labels. Look for an item-specific chart or request measurements for the points that affect your fit. A model’s height and worn size are visual context, not a substitute.

Flat width is not body circumference. An illustrated shirt with a 54 cm flat chest width has an approximate 108 cm circumference at that horizontal level if doubled. This is a garment dimension, not a recommended 108 cm body chest. Construction, ease, stretch and measurement method still matter.

Measure the piece you already trust

Use a soft tape and record one unit throughout. Choose a reference garment you like for the same purpose. A relaxed overshirt is a poor baseline for a fitted dress shirt. Fasten buttons or zip, lay the item on a flat surface and smooth it without pulling. Take each reading twice.

01 / Copy the seller’s endpoints.Sleeve length may start at the shoulder seam or centre back. Thigh width may start at the crotch or below it. Different starting points produce numbers you cannot directly compare.
02 / Record the reference and product side by side.Write each item’s chest or waist, then shoulders or seat, sleeves or inseam, using the same units. Keep the reference garment’s intended fit in mind.
03 / Decide by the problem area.A shirt that pulls across the chest needs attention there; trousers that pinch while sitting need seat and thigh information. Do not let a matching waist or size label settle a different fit problem.

Which measurements matter for each garment?

Shirt and knit: chest, shoulder, sleeve, length

Measure chest straight across at the published underarm point. For set-in sleeves, measure shoulder seam to shoulder seam, then shoulder seam to cuff if that is the chart’s method. A dropped shoulder or raglan sleeve needs the seller’s alternative endpoint. Shirt length may start beside the collar or at the back collar seam. A loose knit can stretch on the table, so let it settle before measuring.

Blazer and outerwear: the planned layer changes the answer

Compare with a jacket worn over the same kind of shirt or knit. Check the shoulder and chest first, then sleeve and back length. After measuring your reference jacket, close it and reach forward; the numbers cannot show whether the armhole or back construction permits the movement you need. A small sleeve or hem adjustment may be possible, but do not assume a shoulder or chest can be economically rebuilt.

Trousers: waist alone cannot predict seated comfort

Fasten and align the waistband without stretching; compare flat waist width. Measure front rise from the crotch seam junction to the top of the front waistband. Check seat/hip and thigh at the seller’s indicated points, then inseam from the crotch to hem. A listed outseam starts at the waistband and is not interchangeable with inseam. Leg opening describes the hem width but does not tell you whether the seat works.

Trouser measurement illustration showing waistband, rise, thigh, inseam and hem points
For a trouser purchase, record waist, rise, seat or hip, thigh and length. Verify the seller’s diagram before comparing.

When two sizes both seem plausible

Here is a hypothetical shirt comparison. Your comfortable reference is 54 cm across the chest and 45 cm across the shoulders. One candidate is 55 cm chest and 43 cm shoulders; another is 57 cm chest and 45 cm shoulders, measured at the same points. The first is closer at the chest but substantially narrower at the shoulders. If shoulder restriction is your usual problem, the second may deserve closer consideration, but fabric, armhole, silhouette and length still need checking. Neither set of numbers guarantees fit.

Useful rule: identify the non-adjustable or troublesome area first. If both sizes miss it, choose a different cut instead of relying on tailoring. If both are plausible, compare the remaining points and review the current exchange and return conditions before checkout.

What if a MONSEN listing has no usable garment numbers?

A product description can name a fit and tell you which areas a chart should cover without displaying every finished measurement in searchable text. For example, the current Cotton-Linen Windsor Collar Shirt listing calls the fit “modern regular” and directs shoppers to shoulder, chest, sleeve and length measurements. Those words help identify the questions to ask; they do not supply your specific size’s dimensions on their own.

A clear question to send before ordering

“For the [exact item, color and size], could you provide finished garment measurements in cm for [chest, shoulder, sleeve and length] and show where each is measured? Is the chest number a flat width or full circumference?”

For trousers, replace that list with waist, seat/hip, rise, thigh and inseam. If a point is unavailable, decide whether the remaining information is sufficient for your body and purchase risk. A photograph or a generic “true to size” claim cannot supply a missing number.

After delivery, check before altering or removing tags

Try the piece with the layers and shoes you planned. Sit, walk, reach and inspect for pulling or gaping. Recheck the item’s care label and the store’s live policy before washing, hemming or removing tags. MONSEN’s Pants Essentials guidance says altered, washed, stained or tagless items may not qualify for exchange or return; the full policy controls your order.

Frequently asked questions

Should I double a flat measurement?

Only when you need an approximate circumference for the same garment area and the chart confirms a flat width. Do not compare that result directly with a body measurement without understanding intended ease.

Should I always size up between sizes?

No. A larger size may solve pulling at one point but move the shoulder or length too far. Compare the whole measurement pattern and the item’s intended silhouette.

Can a tailor fix a trouser that is tight at the seat?

Possibly, depending on construction and seam allowance, but you cannot assume it from a product photo. A different cut is often the safer pre-purchase decision when seat and thigh measurements are insufficient.

Next step: choose one reference garment, write down the two or three measurements that most affect your fit, and check whether the exact item’s chart provides those numbers by a matching method. Ask the seller when it does not.

Method and sources: this guide synthesizes flat-garment comparisons with the Shopify product-description guidance, the linked MONSEN item information and the store’s size guidance, reviewed September 30, 2026. Product sizes and purchase terms can change. The measurement diagrams are instructional; the exact item chart takes priority. This article does not claim a hands-on test or guaranteed fit.